The 52V 11.6Ah Dolphin Pack is designed to work with our 48V Bafang Mid Drive Electric Bike Conversion Kits. This 52V Dolphin Pack will give you the turbocharge boost you are looking for to maximize your voltage with the 48V Bafang BBS02/BBSHD kits! The battery includes plug and play connections for the Bafang BBS02/BBS01 motor kits.This 52 volt battery should be compatible with most 48 volt ebike or ebike kit (however you may have to change the connnections depending on your setup). The battery securely attaches and locks to the included downtube ebike mount with the included keys. Batteries can be removed easily without disconnecting any wires to charge and/or store indoors.
52V Battery packs are designed to turbocharge your 48V Bafang BBS02/BBSHD ebike kits by maxing out the possible amount of voltage that the 48V Bafang controllers can handle to get the most possible power out of your 48V ebike system. 52V batteries give your 48V Bafang systems more power and longer range. The 52V pack gives you an extra 200 watts more than a 48V pack. The added voltage also provides you higher top end speed, more power and a longer distance range compared to a 48V ebike battery pack with the same amp hour rating. A 52V battery will give you ~8% longer range than a 48V battery with same amp hour rating. All our Bafang motor kits (BBS02/BBSHD) are compatible with 52V batteries as our upgraded, robust controllers are made to handle a maximum of 52 volts.
The Dolphin style case is sturdy and has a durable mounting device and connections. The Dolphin ebike battery design is able to fit on most bicycle triangle frame's on the bike's downtube where you typically find the water bottle holder mount. We also offer battery extension cables, so you can choose to mount your battery wherever works best for you specific ebike setup.
- 52V 11.6Ah Lithium-ion Ebike Battery Pack
- Genuine, High-quality Samsung 29E 18650 Cells
- Smart Battery Management System (don't have to worry about overcharging!)
- Direct (Male and Female) Anderson plug connections for our Bafang motor kits
- Dolphin Ebike design that easily fits and mounts on most bike frames
- Ebike Battery Mount (typically mounted on bike's downtube were the water bottle holder goes)
- Built-in 5V USB port for charging electronic devices
- Convenient and quick mounting release to easily take your battery on and off your bike
- Lockable and removable with two keys included
- LED light charge-level indicator
- High-Quality Aluminum Battery Charger with built-in fan and 3-prong grounded US Plug (your choice of 2amp or 3amp Quick Charger)
- Easy to use charger port
- Pack voltage: 52 volts
- Pack capacity: 11.6 Amp hours
- Up to 603-watt hours
- 35 Amps Continuous BMS Discharge Rate
- Lightweight approximately 8 pounds
52V 11.6Ah Dolphin Battery Specs:
Will the 52V 11.6Ah Dolphin Battery fit on my bike?
If you are unsure of whether the battery will fit on your bike frame, download and print the below actual size battery cut-out. Follow the directions on the downloads for cutting out and creating your actual size battery cutout to make sure that it works on your bike frame.
**Please note, you will want some wiggle room from your bike frame to the front/top of the battery (approx. 0.5 inch) in addition to the battery cutout to ensure that you will be able to easily take the battery on and off your bike.
52V 11.6Ah Dolphin Pack Downloadable Actual Size Cutout
52V 11.6Ah Dolphin Pack Downloadable Dimensions
(Dimensions provided are in millimeters.)